Construction Calculators & Takeoffs
18 preliminary sizing, geometric material takeoff, and editable unit-rate cost estimators with Metric/Imperial toggles and client-side PDF export.
- Preliminary Material Takeoffs
- Editable Local Unit Rates & Waste %
- Instant Client-Side PDF Export
- Imperial (yd³, sq ft) & Metric (m³, m²)
Taxonomy
Five Construction Collections
4 trade collections housing all 18 unique calculators, plus the cross-category Material & Cost Estimators filter.
HVAC & Electrical
Preliminary BTU sizing, ductwork takeoffs, heat pumps, panel loads, and voltage drop.
Roofing & Exterior
Roof replacement, flat roofs, metal roofing, shingles, gutters, and vinyl siding.
Interior & Concrete
Concrete slabs and footings, drywall installation bids, and painting estimators.
Flooring & Installation
Epoxy floor coating systems and tile flooring, grout, and thinset takeoffs.
Material & Cost Estimators
Cross-category facet collection filtering the 18 construction calculators by materials, labor, installation, waste, and budget outputs.
HVAC & Electrical
HVAC & Electrical
Generate preliminary HVAC capacity budgets, sheet-metal ductwork takeoffs, panel load summaries, and conductor voltage-drop checks before consulting a licensed professional.

AC Tonnage & BTU Calculator
Estimate preliminary cooling capacity in BTU/h and nominal refrigeration tons with climate, ceiling, sun, and insulation adjustments.

Mini-Split Sizing & Cost Calculator
Sum multi-zone ductless mini-split BTU/h capacities, indoor head counts, and itemized installation budget.

HVAC Ductwork Takeoff Calculator
Calculate round and rectangular duct sheet-metal surface area, insulation wrap, fittings, and registers for material takeoff.

Heat Pump Installation Estimator
Estimate heat pump system capacity, climate assumption impact, and itemized installation budget.

Electrical Panel Upgrade Estimator
Estimate preliminary connected electrical load in amps and itemize panel upgrade material, labor, and permit costs.

Electrical Wire Gauge & Voltage Drop Calculator
Calculate single-phase, three-phase, or DC circuit voltage drop from conductor resistance and compare against conservative reference ampacity.
Roofing & Exterior
Roofing & Exterior
Estimate roof pitch multipliers, roofing squares, shingle bundles, metal panels, seamless gutters, and vinyl siding quantities with editable waste and cost rates.

Roof Replacement Cost Estimator
Calculate sloped roof area from plan footprint and pitch multiplier, roofing squares, tear-off, disposal, and replacement budget.

Commercial Flat Roof Estimator
Estimate membrane area with lap/waste allowance, rigid insulation boards, parapet flashing, drain allowances, and budget.

Metal Roofing Takeoff Calculator
Calculate metal roof panel count from effective coverage width, panel slope length, ridge/eave trim, and fasteners.

Seamless Gutter Cost Calculator
Calculate total gutter linear footage, hidden hangers by spacing, miters/corners, end caps, outlets, downspouts, and removal/installation cost.

Vinyl Siding Takeoff Estimator
Calculate net exterior wall and gable areas, siding squares, boxes/panels, starter strip, J-channel, and corner posts.

Roofing Shingle & Square Calculator
Convert roof dimensions and pitch into roofing squares, field shingle bundles, ridge-cap bundles, and underlayment rolls.
Interior & Concrete
Interior & Concrete
Calculate cubic yards or cubic meters for concrete slabs and footings, sheetrock and joint compound takeoffs, and interior/exterior paint quantities and bids.

Drywall Installation Bid Calculator
Calculate drywall sheets, joint tape, joint compound buckets, screws, finish-level labor, and preliminary bid total.

Concrete Slab & Footing Calculator
Calculate concrete volume in cubic yards and cubic meters for slabs and continuous/pier footings, plus waste and premix bag counts.

Interior Painting Bid Generator
Generate a preliminary interior painting bid including wall/ceiling areas, primer, finish coats, surface prep labor, overhead, and profit.

Interior/Exterior Paint Coverage Estimator
Calculate pure paint material quantity (gallons or liters) from surface dimensions, opening deductions, number of coats, and coverage rate.
Flooring & Installation
Flooring & Installation
Plan flooring installations with multi-coat epoxy kit calculators and tile box, thinset, and grout joint volume takeoffs.

Epoxy Flooring Cost Estimator
Estimate epoxy floor coating kits/gallons across primer, base, broadcast, and topcoats plus diamond grinding/moisture prep and installation budget.

Tile Flooring Takeoff Calculator
Calculate tile piece count, boxes needed, layout waste, thinset mortar bags, and geometric grout joint volume.
