Concrete Slab & Footing Calculator
Calculate concrete volume in cubic yards and cubic meters for slabs and continuous/pier footings, plus waste and premix bag counts.
- Verified Mathematical Formula
- Downloadable PDF Estimate
- Metric & Imperial Units
Concrete Slab & Footing Calculator
Calculate concrete volume in cubic yards and cubic meters for slabs and continuous/pier footings, plus waste and premix bag counts.
Concrete Slab & Footing Calculator Interactive Calculator & Breakdown
6.52 yd³
6.52 yd³ (4.98 m³ / 176 ft³) • Or 294 Premix Bags
- ⚠️ Geometric volume calculation only. Structural slab thickness, footing frost depth, soil bearing capacity, and rebar reinforcement design require a licensed structural engineer and local building code review.
| Item / Metric | Calculated Value |
|---|---|
| Total Volume in Cubic Yards (+10% waste)Base: 5.93 yd³ | 6.52 yd³ |
| Total Volume in Cubic Meters (+10% waste)Base: 4.53 m³ | 4.98 m³ |
| Total Volume in Cubic Feet | 176 ft³ |
| Premix Concrete Bags (@ 0.6 ft³/bag)0.017 m³/bag | 294 bags |
| Cost Component | Share | Amount |
|---|---|---|
| Primary Materials (incl. 10% waste)6.52 yd³ × $165.00 | 32% | $1,076.29 |
| Formwork, Vapor Barrier & User-Specified Reinforcement Allowance | 10% | $350.00 |
| Concrete Placement, Screed & Finishing Labor (Lump-Sum) | 36% | $1,200.00 |
| Contractor Overhead (10%) | 8% | $262.63 |
| Contractor Profit (10%) | 9% | $288.89 |
| Estimated Tax (6%) | 6% | $190.67 |
| Total Preliminary Estimate | $3,368.48 | |
Active Calculation Steps & Disclosed Assumptions
Formula v1.0.0Live Formula Evaluation:
- • Base Volume = 160 ft³ (slab) + 0 ft³ (footings) = 160 ft³
- • With 10% waste = 176 ft³ = 6.52 yd³ (4.98 m³)
Assumptions Applied:
- 1 cubic yard (yd³) = 27 cubic feet (ft³) = 0.7646 cubic meters (m³).
- Premix bag count assumes 0.6 ft³ yield per bag (standard 80-lb bag).
Slab & Footing Geometric Volume and Bag Yield Formula
Slab Volume = Length × Width × Thickness × SlabCount. Footing Volume = FootingLength × FootingWidth × FootingDepth × FootingCount. Total Volume with Waste = (SlabVolume + FootingVolume) × (1 + WastePercent / 100). Cubic Yards = Volume(ft³) ÷ 27 (1 m³ = 1.30795 yd³). Premix Bags = ceil(TotalVolume / YieldPerBag).
Worked Example: 20 ft × 24 ft Garage Slab (4 inches thick) with 10% Waste
4-inch (0.3333 ft) slab thickness with 10% waste allowance for subgrade unevenness.
Sample Inputs
- Slab: 20 ft × 24 ft × 4 in
- Footing Volume: 0
- Waste: 10%
Calculation Steps
- Base Slab Volume = 20 × 24 × (4 / 12) = 160.0 ft³ (5.93 yd³)
- With 10% Waste = 160.0 × 1.10 = 176.0 ft³ = 6.52 yd³ (4.98 m³)
- 80-lb Bag Equivalent (@ 0.60 ft³/bag) = ceil(176.0 / 0.60) = 294 bags
Example Result: 6.52 cubic yards (4.98 m³) ready-mix concrete or 294 × 80-lb bags.
Support
Frequently Asked Questions
Quick answers about how this works, what it assumes, and where its limits are.
Why should I add 5% to 10% waste when ordering ready-mix concrete?
Subgrade excavation is rarely perfectly flat, forms can deflect slightly under wet concrete pressure, and some concrete remains in the chute or pump.
Does this calculator tell me how thick my slab or footing needs to be?
No. Slab thickness, footing depth below frost line, concrete PSI strength, and reinforcement spacing must be specified by local building codes and a licensed structural engineer.
Keep going
Related tools, calculators & guides
Images to PDF Converter
Combine multiple PNG, JPG, or WebP images into a clean, multi-page PDF document on-device.
PDF Merger
Combine multiple PDF documents in custom order with optional per-file page ranges while preserving crisp vector text.
PDF Compressor
Shrink heavy PDF documents using lossless vector stream rebuilding or configurable DPI and JPEG quality re-compression.

Epoxy Flooring Cost Estimator
Estimate epoxy floor coating kits/gallons across primer, base, broadcast, and topcoats plus diamond grinding/moisture prep and installation budget.

Tile Flooring Takeoff Calculator
Calculate tile piece count, boxes needed, layout waste, thinset mortar bags, and geometric grout joint volume.

Unit Converter
Convert length, area, volume, weight/mass, and temperature across metric and imperial units.
How to Calculate Concrete Slab & Footing Volume (Cubic Yards & Meters)
A step-by-step explanation of converting feet and inches into cubic yards (yd³) or cubic meters (m³), applying subgrade waste allowances, and comparing ready-mix against premix bags.
Drywall Sheet Counts, Finish Levels (3–5) & Tile/Grout Takeoff Math
Calculate drywall boards (4×8 vs. 4×12 ft), joint compound and tape allowances by finish level, plus tile waste factors, thinset mortar bags, and geometric grout joint volume.
