Interior/Exterior Paint Coverage Estimator
Calculate pure paint material quantity (gallons or liters) from surface dimensions, opening deductions, number of coats, and coverage rate.
- Verified Mathematical Formula
- Downloadable PDF Estimate
- Metric & Imperial Units
Interior/Exterior Paint Coverage Estimator
Calculate pure paint material quantity (gallons or liters) from surface dimensions, opening deductions, number of coats, and coverage rate.
Interior/Exterior Paint Coverage Estimator Interactive Calculator & Breakdown
5 gallons
Exact Volume: 4.32 gallons (16.35 L) across 2 coats
| Item / Metric | Calculated Value |
|---|---|
| Net Paintable Area (Gross − Openings) | 720 ft² |
| Total Multi-Coat Area (2 coats + 5% waste) | 1,512 ft² |
| Exact Paint Volume Needed16.35 L | 4.32 gallons |
| Whole 1-Gallon Containers | 5 gallons |
Active Calculation Steps & Disclosed Assumptions
Formula v1.0.0Live Formula Evaluation:
- • Net Area = 800 − 80 = 720 ft²
- • Required Coat Area = 720 × 2 × (1 + 5/100) = 1512 ft²
- • Exact Volume = 1512 ÷ 350 = 4.32 gallons (5 containers)
Assumptions Applied:
- Material-only calculator (omits contractor labor/markup by default). Spread rate = 350 ft²/gallons.
Material-Only Paint Coverage Formula
Net Paintable Area = Max(0, GrossSurfaceArea − OpeningsArea). Required Coat Area = Net Paintable Area × Coats × (1 + WastePercent / 100). Exact Volume = Required Coat Area ÷ CoveragePerUnitVolume. Whole Containers = ceil(Exact Volume).
Worked Example: 800 sq ft Wall Area Minus 80 sq ft Windows/Doors, 2 Coats at 350 sq ft/Gallon, 5% Waste
Smooth interior drywall with 2 finish coats.
Sample Inputs
- Gross Area: 800 ft²
- Openings: 80 ft²
- Coats: 2
- Spread Rate: 350 ft²/gal
- Waste: 5%
Calculation Steps
- Net Area = 800 − 80 = 720 ft²
- Total Coat Area with 5% Waste = 720 × 2 × 1.05 = 1,512 ft²
- Exact Gallons = 1,512 ÷ 350 = 4.32 gallons -> 5 one-gallon containers
Example Result: 4.32 exact gallons (5 whole gallons / 16.35 liters).
Support
Frequently Asked Questions
Quick answers about how this works, what it assumes, and where its limits are.
What spread rate should I use for rough exterior stucco or masonry?
While smooth interior drywall typically achieves 350–400 sq ft per gallon, rough exterior stucco, brick, or textured siding often covers only 150–250 sq ft per gallon on the first coat.
Why does this calculator omit labor and contractor profit by default?
This tool is dedicated to fast material quantity calculation. If you need a full contractor bid with prep hours, primer, labor, overhead, and profit, use our Interior Painting Bid Generator.
Keep going
Related tools, calculators & guides
Images to PDF Converter
Combine multiple PNG, JPG, or WebP images into a clean, multi-page PDF document on-device.
PDF Merger
Combine multiple PDF documents in custom order with optional per-file page ranges while preserving crisp vector text.
PDF Compressor
Shrink heavy PDF documents using lossless vector stream rebuilding or configurable DPI and JPEG quality re-compression.

Interior Painting Bid Generator
Generate a preliminary interior painting bid including wall/ceiling areas, primer, finish coats, surface prep labor, overhead, and profit.

Drywall Installation Bid Calculator
Calculate drywall sheets, joint tape, joint compound buckets, screws, finish-level labor, and preliminary bid total.

Vinyl Siding Takeoff Estimator
Calculate net exterior wall and gable areas, siding squares, boxes/panels, starter strip, J-channel, and corner posts.
Interior Paint Spread Rates, Primer Coats & Resinous Epoxy Coverage Math
Learn how to calculate net paintable wall and ceiling area, adjust gallon spread rates for porous vs. smooth substrates, and estimate multi-coat epoxy floor kits.
